Online shop
EN
Request a quote

DL382 fault codes

Owner guides · Fault codes

Transmission diagnostics in a workshop, illustration
121 fault-code entriesSearch by code or symptomVehicle-specific diagnostics
At a glance

Search by fault code and open its description. See what the code refers to and what is checked during diagnostics.

Fault codesSearch the directory
Approve the repair plan and estimate before work begins.

Updated

Ask about diagnostics
Fault codes · Search the directoryExplore this guide
DL382 fault codes

Choose a topic

Overview ↑

Search the directory

Directory coverage

Code descriptions help explain the diagnostic process. Interpretation depends on the full fault text, suffix, reporting controller and software version. The same base code can refer to different situations. This is not a parts-replacement instruction or a complete list for every version.

Fault codes
P0501Vehicle speed sensor A: range/performance
What is checked?
The named component’s signal, wiring, connectors and supply are checked. A sensor or valve code alone does not mean the entire mechatronics unit needs replacing.
Link to this entry
P0560System voltage
What is checked?
Battery condition, charging, power supplies, grounds and connectors are checked under load. The code alone does not establish a control-module fault.
Link to this entry
P0562System voltage too low
What is checked?
Battery condition, charging, power supplies, grounds and connectors are checked under load. The code alone does not establish a control-module fault.
Link to this entry
P0602Control module programming error
What is checked?
The software version, commissioning prerequisites and other faults are checked. Basic settings cannot repair a worn component, leakage or an electrical fault.
Link to this entry
P0604Control module RAM memory error
What is checked?
The complete fault report and freeze-frame conditions are reviewed. The repair is planned from measurements and findings on the vehicle.
Link to this entry
P0607Control module performance
What is checked?
The complete fault report and freeze-frame conditions are reviewed. The repair is planned from measurements and findings on the vehicle.
Link to this entry
P06A6Sensor reference voltage circuit A: range/performance
What is checked?
The named component’s signal, wiring, connectors and supply are checked. A sensor or valve code alone does not mean the entire mechatronics unit needs replacing.
Link to this entry
P06A7Sensor reference voltage circuit B: range/performance
What is checked?
The named component’s signal, wiring, connectors and supply are checked. A sensor or valve code alone does not mean the entire mechatronics unit needs replacing.
Link to this entry
P06A8Sensor reference voltage circuit C: range/performance
What is checked?
The named component’s signal, wiring, connectors and supply are checked. A sensor or valve code alone does not mean the entire mechatronics unit needs replacing.
Link to this entry
P06A9Sensor reference voltage circuit D: range/performance
What is checked?
The named component’s signal, wiring, connectors and supply are checked. A sensor or valve code alone does not mean the entire mechatronics unit needs replacing.
Link to this entry
P0614Engine and transmission control modules incompatible
What is checked?
The software version, commissioning prerequisites and other faults are checked. Basic settings cannot repair a worn component, leakage or an electrical fault.
Link to this entry
P062FControl module EEPROM memory error
What is checked?
The complete fault report and freeze-frame conditions are reviewed. The repair is planned from measurements and findings on the vehicle.
Link to this entry
P0666Internal control module temperature sensor A circuit
What is checked?
Temperature readings are compared with actual operating conditions. Sensor operation, fluid and cooling are checked before deciding on a repair.
Link to this entry
P0667Internal control module temperature sensor A: range/performance
What is checked?
Temperature readings are compared with actual operating conditions. Sensor operation, fluid and cooling are checked before deciding on a repair.
Link to this entry
P0700Transmission control system malfunction
What is checked?
The complete fault report and freeze-frame conditions are reviewed. The repair is planned from measurements and findings on the vehicle.
Link to this entry
P0702Transmission control system electrical fault
What is checked?
The named component’s signal, wiring, connectors and supply are checked. A sensor or valve code alone does not mean the entire mechatronics unit needs replacing.
Link to this entry
P0716Input speed sensor A circuit: range/performance
What is checked?
The named component’s signal, wiring, connectors and supply are checked. A sensor or valve code alone does not mean the entire mechatronics unit needs replacing.
Link to this entry
P0718Input speed sensor A: intermittent signal
What is checked?
The named component’s signal, wiring, connectors and supply are checked. A sensor or valve code alone does not mean the entire mechatronics unit needs replacing.
Link to this entry
P0745Pressure control solenoid A
What is checked?
Requested and actual pressure are compared, with checks of fluid supply, pump operation and possible leakage. Temperature and load when the fault occurs help narrow down the cause.
Link to this entry
P0748Pressure control solenoid A: electrical fault
What is checked?
The named component’s signal, wiring, connectors and supply are checked. A sensor or valve code alone does not mean the entire mechatronics unit needs replacing.
Link to this entry
P0750Shift solenoid A
What is checked?
Requested and actual gear, position signals and speed readings are compared. Oil pressure and mechanical operation are also checked under the conditions that trigger the fault.
Link to this entry
P0753Shift solenoid A: electrical fault
What is checked?
The named component’s signal, wiring, connectors and supply are checked. A sensor or valve code alone does not mean the entire mechatronics unit needs replacing.
Link to this entry
P0755Shift solenoid B
What is checked?
Requested and actual gear, position signals and speed readings are compared. Oil pressure and mechanical operation are also checked under the conditions that trigger the fault.
Link to this entry
P0758Shift solenoid B: electrical fault
What is checked?
The named component’s signal, wiring, connectors and supply are checked. A sensor or valve code alone does not mean the entire mechatronics unit needs replacing.
Link to this entry
P0760Shift solenoid C
What is checked?
Requested and actual gear, position signals and speed readings are compared. Oil pressure and mechanical operation are also checked under the conditions that trigger the fault.
Link to this entry
P0763Shift solenoid C: electrical fault
What is checked?
The named component’s signal, wiring, connectors and supply are checked. A sensor or valve code alone does not mean the entire mechatronics unit needs replacing.
Link to this entry
P0765Shift solenoid D
What is checked?
Requested and actual gear, position signals and speed readings are compared. Oil pressure and mechanical operation are also checked under the conditions that trigger the fault.
Link to this entry
P0768Shift solenoid D: electrical fault
What is checked?
The named component’s signal, wiring, connectors and supply are checked. A sensor or valve code alone does not mean the entire mechatronics unit needs replacing.
Link to this entry
P0770Shift solenoid E
What is checked?
Requested and actual gear, position signals and speed readings are compared. Oil pressure and mechanical operation are also checked under the conditions that trigger the fault.
Link to this entry
P0773Shift solenoid E: electrical fault
What is checked?
The named component’s signal, wiring, connectors and supply are checked. A sensor or valve code alone does not mean the entire mechatronics unit needs replacing.
Link to this entry
P0775Pressure control solenoid B
What is checked?
Requested and actual pressure are compared, with checks of fluid supply, pump operation and possible leakage. Temperature and load when the fault occurs help narrow down the cause.
Link to this entry
P0778Pressure control solenoid B: electrical fault
What is checked?
The named component’s signal, wiring, connectors and supply are checked. A sensor or valve code alone does not mean the entire mechatronics unit needs replacing.
Link to this entry
P0795Pressure control solenoid C
What is checked?
Requested and actual pressure are compared, with checks of fluid supply, pump operation and possible leakage. Temperature and load when the fault occurs help narrow down the cause.
Link to this entry
P0798Pressure control solenoid C: electrical fault
What is checked?
The named component’s signal, wiring, connectors and supply are checked. A sensor or valve code alone does not mean the entire mechatronics unit needs replacing.
Link to this entry
P0811Clutch A excessive slip
What is checked?
Clutch control, shaft speeds and hydraulic operation are compared. Slip or judder may relate to wear, pressure or control; the cause is investigated before parts are replaced.
Link to this entry
P081EClutch B excessive slip
What is checked?
Clutch control, shaft speeds and hydraulic operation are compared. Slip or judder may relate to wear, pressure or control; the cause is investigated before parts are replaced.
Link to this entry
P0B0ATransmission oil pump motor supply voltage too low
What is checked?
Battery condition, charging, power supplies, grounds and connectors are checked under load. The code alone does not establish a control-module fault.
Link to this entry
P0B0DElectric/auxiliary transmission oil pump motor control module
What is checked?
The named component’s signal, wiring, connectors and supply are checked. A sensor or valve code alone does not mean the entire mechatronics unit needs replacing.
Link to this entry
P0C28Electric/auxiliary transmission oil pump A: motor overcurrent
What is checked?
The named component’s signal, wiring, connectors and supply are checked. A sensor or valve code alone does not mean the entire mechatronics unit needs replacing.
Link to this entry
P0C29Electric/auxiliary transmission oil pump A: control circuit performance
What is checked?
The named component’s signal, wiring, connectors and supply are checked. A sensor or valve code alone does not mean the entire mechatronics unit needs replacing.
Link to this entry
P0C2AElectric/auxiliary transmission oil pump A: motor stalled
What is checked?
The named component’s signal, wiring, connectors and supply are checked. A sensor or valve code alone does not mean the entire mechatronics unit needs replacing.
Link to this entry
P0C2CTransmission oil pump controller feedback: range/performance
What is checked?
The named component’s signal, wiring, connectors and supply are checked. A sensor or valve code alone does not mean the entire mechatronics unit needs replacing.
Link to this entry
P0C2DTransmission oil pump controller feedback too low
What is checked?
The named component’s signal, wiring, connectors and supply are checked. A sensor or valve code alone does not mean the entire mechatronics unit needs replacing.
Link to this entry
P0C2ETransmission oil pump controller feedback too high
What is checked?
The named component’s signal, wiring, connectors and supply are checked. A sensor or valve code alone does not mean the entire mechatronics unit needs replacing.
Link to this entry
P187AGear selector 1: engagement unsuccessful
What is checked?
The complete fault report and freeze-frame conditions are reviewed. The repair is planned from measurements and findings on the vehicle.
Link to this entry
P187BGear selector 2: engagement unsuccessful
What is checked?
The complete fault report and freeze-frame conditions are reviewed. The repair is planned from measurements and findings on the vehicle.
Link to this entry
P187CGear selector 3: engagement unsuccessful
What is checked?
The complete fault report and freeze-frame conditions are reviewed. The repair is planned from measurements and findings on the vehicle.
Link to this entry
P187DGear selector 4: engagement unsuccessful
What is checked?
The complete fault report and freeze-frame conditions are reviewed. The repair is planned from measurements and findings on the vehicle.
Link to this entry
P2159Vehicle speed sensor B: range/performance
What is checked?
The named component’s signal, wiring, connectors and supply are checked. A sensor or valve code alone does not mean the entire mechatronics unit needs replacing.
Link to this entry
P2162Vehicle speed sensors A and B: correlation fault
What is checked?
The named component’s signal, wiring, connectors and supply are checked. A sensor or valve code alone does not mean the entire mechatronics unit needs replacing.
Link to this entry
P2706Shift solenoid F
What is checked?
Requested and actual gear, position signals and speed readings are compared. Oil pressure and mechanical operation are also checked under the conditions that trigger the fault.
Link to this entry
P2709Shift solenoid F: electrical fault
What is checked?
The named component’s signal, wiring, connectors and supply are checked. A sensor or valve code alone does not mean the entire mechatronics unit needs replacing.
Link to this entry
P2766Input speed sensor B: range/performance
What is checked?
The named component’s signal, wiring, connectors and supply are checked. A sensor or valve code alone does not mean the entire mechatronics unit needs replacing.
Link to this entry
P2768Input speed sensor B: intermittent signal
What is checked?
The named component’s signal, wiring, connectors and supply are checked. A sensor or valve code alone does not mean the entire mechatronics unit needs replacing.
Link to this entry
P2831Shift fork A position sensor circuit
What is checked?
The named component’s signal, wiring, connectors and supply are checked. A sensor or valve code alone does not mean the entire mechatronics unit needs replacing.
Link to this entry
P2832Shift fork A position sensor: range/performance
What is checked?
The named component’s signal, wiring, connectors and supply are checked. A sensor or valve code alone does not mean the entire mechatronics unit needs replacing.
Link to this entry
P2836Shift fork B position sensor circuit
What is checked?
The named component’s signal, wiring, connectors and supply are checked. A sensor or valve code alone does not mean the entire mechatronics unit needs replacing.
Link to this entry
P2837Shift fork B position sensor: range/performance
What is checked?
The named component’s signal, wiring, connectors and supply are checked. A sensor or valve code alone does not mean the entire mechatronics unit needs replacing.
Link to this entry
P283BShift fork C position sensor circuit
What is checked?
The named component’s signal, wiring, connectors and supply are checked. A sensor or valve code alone does not mean the entire mechatronics unit needs replacing.
Link to this entry
P283CShift fork C position sensor: range/performance
What is checked?
The named component’s signal, wiring, connectors and supply are checked. A sensor or valve code alone does not mean the entire mechatronics unit needs replacing.
Link to this entry
P2840Shift fork D position sensor circuit
What is checked?
The named component’s signal, wiring, connectors and supply are checked. A sensor or valve code alone does not mean the entire mechatronics unit needs replacing.
Link to this entry
P2841Shift fork D position sensor: range/performance
What is checked?
The named component’s signal, wiring, connectors and supply are checked. A sensor or valve code alone does not mean the entire mechatronics unit needs replacing.
Link to this entry
P2845Shift fork A: incorrect neutral indication
What is checked?
Requested and actual gear, position signals and speed readings are compared. Oil pressure and mechanical operation are also checked under the conditions that trigger the fault.
Link to this entry
P2846Shift fork B: incorrect neutral indication
What is checked?
Requested and actual gear, position signals and speed readings are compared. Oil pressure and mechanical operation are also checked under the conditions that trigger the fault.
Link to this entry
P2847Shift fork C: incorrect neutral indication
What is checked?
Requested and actual gear, position signals and speed readings are compared. Oil pressure and mechanical operation are also checked under the conditions that trigger the fault.
Link to this entry
P2848Shift fork D: incorrect neutral indication
What is checked?
Requested and actual gear, position signals and speed readings are compared. Oil pressure and mechanical operation are also checked under the conditions that trigger the fault.
Link to this entry
P2849Shift fork A stuck
What is checked?
Requested and actual gear, position signals and speed readings are compared. Oil pressure and mechanical operation are also checked under the conditions that trigger the fault.
Link to this entry
P284AShift fork B stuck
What is checked?
Requested and actual gear, position signals and speed readings are compared. Oil pressure and mechanical operation are also checked under the conditions that trigger the fault.
Link to this entry
P284BShift fork C stuck
What is checked?
Requested and actual gear, position signals and speed readings are compared. Oil pressure and mechanical operation are also checked under the conditions that trigger the fault.
Link to this entry
P284CShift fork D stuck
What is checked?
Requested and actual gear, position signals and speed readings are compared. Oil pressure and mechanical operation are also checked under the conditions that trigger the fault.
Link to this entry
P284DShift fork A: movement without a command
What is checked?
Requested and actual gear, position signals and speed readings are compared. Oil pressure and mechanical operation are also checked under the conditions that trigger the fault.
Link to this entry
P284EShift fork B: movement without a command
What is checked?
Requested and actual gear, position signals and speed readings are compared. Oil pressure and mechanical operation are also checked under the conditions that trigger the fault.
Link to this entry
P284FShift fork C: movement without a command
What is checked?
Requested and actual gear, position signals and speed readings are compared. Oil pressure and mechanical operation are also checked under the conditions that trigger the fault.
Link to this entry
P2850Shift fork D: movement without a command
What is checked?
Requested and actual gear, position signals and speed readings are compared. Oil pressure and mechanical operation are also checked under the conditions that trigger the fault.
Link to this entry
U0001High-speed CAN communication bus
What is checked?
The full vehicle scan, module power supplies and communication are checked. A transmission warning may also originate in another system.
Link to this entry
U0002High-speed CAN communication bus malfunction
What is checked?
The full vehicle scan, module power supplies and communication are checked. A transmission warning may also originate in another system.
Link to this entry
U0100Lost communication with engine/powertrain control module A
What is checked?
The full vehicle scan, module power supplies and communication are checked. A transmission warning may also originate in another system.
Link to this entry
U0121Lost communication with ABS control module
What is checked?
The full vehicle scan, module power supplies and communication are checked. A transmission warning may also originate in another system.
Link to this entry
U0401Invalid data received from engine/powertrain control module A
What is checked?
The full vehicle scan, module power supplies and communication are checked. A transmission warning may also originate in another system.
Link to this entry
U0415Invalid data received from ABS control module
What is checked?
The full vehicle scan, module power supplies and communication are checked. A transmission warning may also originate in another system.
Link to this entry
P071800Input speed sensor A: intermittent signal
Code details
20736
What is checked?
The named component’s signal, wiring, connectors and supply are checked. A sensor or valve code alone does not mean the entire mechatronics unit needs replacing.
Link to this entry
P276800Input speed sensor B: intermittent signal
Code details
20737
What is checked?
The named component’s signal, wiring, connectors and supply are checked. A sensor or valve code alone does not mean the entire mechatronics unit needs replacing.
Link to this entry
P071800Input speed sensor A: intermittent signal
Code details
20736 / 2022
What is checked?
The named component’s signal, wiring, connectors and supply are checked. A sensor or valve code alone does not mean the entire mechatronics unit needs replacing.
Link to this entry
P081100Clutch 1: excessive slip
Code details
20870
What is checked?
Clutch control, shaft speeds and hydraulic operation are compared. Slip or judder may relate to wear, pressure or control; the cause is investigated before parts are replaced.
Link to this entry
P081E00Clutch 2: excessive slip
Code details
20872
What is checked?
Clutch control, shaft speeds and hydraulic operation are compared. Slip or judder may relate to wear, pressure or control; the cause is investigated before parts are replaced.
Link to this entry
P288200Disconnect clutch K0 excessive slip, PHEV only
Code details
20954
What is checked?
Clutch control, shaft speeds and hydraulic operation are compared. Slip or judder may relate to wear, pressure or control; the cause is investigated before parts are replaced.
Link to this entry
P187A00Gear selector 1: engagement unsuccessful
Code details
22331
What is checked?
Requested and actual gear, position signals and speed readings are compared. Oil pressure and mechanical operation are also checked under the conditions that trigger the fault.
Link to this entry
P187B00Gear selector 2: engagement unsuccessful
Code details
22335
What is checked?
Requested and actual gear, position signals and speed readings are compared. Oil pressure and mechanical operation are also checked under the conditions that trigger the fault.
Link to this entry
P187C00Gear selector 3: engagement unsuccessful
Code details
22334
What is checked?
Requested and actual gear, position signals and speed readings are compared. Oil pressure and mechanical operation are also checked under the conditions that trigger the fault.
Link to this entry
P187D00Gear selector 4: engagement unsuccessful
Code details
22333
What is checked?
Requested and actual gear, position signals and speed readings are compared. Oil pressure and mechanical operation are also checked under the conditions that trigger the fault.
Link to this entry
P17F900Parking lock mechanical malfunction
Code details
22345
What is checked?
The complete fault report and freeze-frame conditions are reviewed. The repair is planned from measurements and findings on the vehicle.
Link to this entry
P074700Solenoid 1 stuck in operating position
Code details
20968
What is checked?
The complete fault report and freeze-frame conditions are reviewed. The repair is planned from measurements and findings on the vehicle.
Link to this entry
P077700Solenoid 2 stuck in operating position
Code details
20969
What is checked?
The complete fault report and freeze-frame conditions are reviewed. The repair is planned from measurements and findings on the vehicle.
Link to this entry
P17F900Parking lock mechanical malfunction
What is checked?
The complete fault report and freeze-frame conditions are reviewed. The repair is planned from measurements and findings on the vehicle.
Link to this entry
U030000Control module software incompatible
What is checked?
The software version, commissioning prerequisites and other faults are checked. Basic settings cannot repair a worn component, leakage or an electrical fault.
Interpretation
This code may be reported by a controller other than the transmission. Check the reporting controller in the full scan.
Link to this entry
P0A2B00Drive motor A temperature sensor: range/performance
Code details
50983
What is checked?
Temperature readings are compared with actual operating conditions. Sensor operation, fluid and cooling are checked before deciding on a repair.
Interpretation
This code may be reported by a controller other than the transmission. Check the reporting controller in the full scan.
Link to this entry
P0711Transmission fluid temperature sensor A: range/performance
What is checked?
Temperature readings are compared with actual operating conditions. Sensor operation, fluid and cooling are checked before deciding on a repair.
Link to this entry
P0713Transmission fluid temperature sensor A: signal too high
What is checked?
Temperature readings are compared with actual operating conditions. Sensor operation, fluid and cooling are checked before deciding on a repair.
Link to this entry
P06D5Sensor reference voltage circuit E: range/performance
What is checked?
The named component’s signal, wiring, connectors and supply are checked. A sensor or valve code alone does not mean the entire mechatronics unit needs replacing.
Link to this entry
P0701Transmission control system: range/performance
What is checked?
The complete fault report and freeze-frame conditions are reviewed. The repair is planned from measurements and findings on the vehicle.
Link to this entry
P0563System voltage too high
What is checked?
Battery condition, charging, power supplies, grounds and connectors are checked under load. The code alone does not establish a control-module fault.
Link to this entry
U0151Lost communication with restraint system control module
What is checked?
The full vehicle scan, module power supplies and communication are checked. A transmission warning may also originate in another system.
Link to this entry
P0747Pressure control solenoid A: stuck on
What is checked?
Requested and actual pressure are compared, with checks of fluid supply, pump operation and possible leakage. Temperature and load when the fault occurs help narrow down the cause.
Link to this entry
P0777Pressure control solenoid B: stuck on
What is checked?
Requested and actual pressure are compared, with checks of fluid supply, pump operation and possible leakage. Temperature and load when the fault occurs help narrow down the cause.
Link to this entry
P060BInternal control module analogue-to-digital conversion malfunction
What is checked?
The complete fault report and freeze-frame conditions are reviewed. The repair is planned from measurements and findings on the vehicle.
Link to this entry
P2C83Cold-start shift time too short
What is checked?
The complete fault report and freeze-frame conditions are reviewed. The repair is planned from measurements and findings on the vehicle.
Link to this entry
P0895Shift time too short
What is checked?
The complete fault report and freeze-frame conditions are reviewed. The repair is planned from measurements and findings on the vehicle.
Link to this entry
U0080Vehicle communication bus F
What is checked?
The full vehicle scan, module power supplies and communication are checked. A transmission warning may also originate in another system.
Link to this entry
U1103Production mode active
What is checked?
The software version, commissioning prerequisites and other faults are checked. Basic settings cannot repair a worn component, leakage or an electrical fault.
Link to this entry
P0607Control module performance
Code details
2022
What is checked?
The complete fault report and freeze-frame conditions are reviewed. The repair is planned from measurements and findings on the vehicle.
Link to this entry
C0501Front left wheel speed sensor: range/performance
What is checked?
The named component’s signal, wiring, connectors and supply are checked. A sensor or valve code alone does not mean the entire mechatronics unit needs replacing.
Link to this entry
C0507Front right wheel speed sensor: range/performance
What is checked?
The named component’s signal, wiring, connectors and supply are checked. A sensor or valve code alone does not mean the entire mechatronics unit needs replacing.
Link to this entry
C050DRear left wheel speed sensor: range/performance
What is checked?
The named component’s signal, wiring, connectors and supply are checked. A sensor or valve code alone does not mean the entire mechatronics unit needs replacing.
Link to this entry
C0513Rear right wheel speed sensor: range/performance
What is checked?
The named component’s signal, wiring, connectors and supply are checked. A sensor or valve code alone does not mean the entire mechatronics unit needs replacing.
Link to this entry
C0032Front left wheel speed sensor supply
What is checked?
The named component’s signal, wiring, connectors and supply are checked. A sensor or valve code alone does not mean the entire mechatronics unit needs replacing.
Link to this entry
C0035Front right wheel speed sensor supply
What is checked?
The named component’s signal, wiring, connectors and supply are checked. A sensor or valve code alone does not mean the entire mechatronics unit needs replacing.
Link to this entry
C0038Rear left wheel speed sensor supply
What is checked?
The named component’s signal, wiring, connectors and supply are checked. A sensor or valve code alone does not mean the entire mechatronics unit needs replacing.
Link to this entry
C003BRear right wheel speed sensor supply
What is checked?
The named component’s signal, wiring, connectors and supply are checked. A sensor or valve code alone does not mean the entire mechatronics unit needs replacing.
Link to this entry
C051DMulti-axis acceleration sensor module A: calibration missing
What is checked?
The named component’s signal, wiring, connectors and supply are checked. A sensor or valve code alone does not mean the entire mechatronics unit needs replacing.
Link to this entry
C051CMulti-axis acceleration sensor module A: range/performance
What is checked?
The named component’s signal, wiring, connectors and supply are checked. A sensor or valve code alone does not mean the entire mechatronics unit needs replacing.
Link to this entry
C0552Longitudinal acceleration sensor: range/performance
What is checked?
The named component’s signal, wiring, connectors and supply are checked. A sensor or valve code alone does not mean the entire mechatronics unit needs replacing.
Link to this entry
Diagnostics and repairs · Tampere and YlöjärviAsk about diagnostics
Back to overview ↑Tampere / Ylöjärvi ↓

Locations

VAG servicing and repairs at both locations.

Tell us what your car needs.

Servicing, repairs or diagnostics: start with your vehicle details.

Request a quote